MAIL
I have facebook.
I'm writting about new props in English.

Drakengard 3
How to make cent's weapons and armors.



Materials for making all parts
[Materials for making templates]
-Drawing paper 10sheets
-"Kousakuyousi"(one of hard paper in Japan) 5sheets
-Scotch tape(Sellotape) 3pieces
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
2mm or 1.5mm thick 100cm X 40cm
5mm thick 100cm X 70cm
-"Kousakuyousi"(one of hard paper in Japan) 2sheets
-Plastic sheets 0.5mm thick 2sheets
-Brown Synthetic leather 100cm X 50cm
-Blue Synthetic leather 100cm X 10cm
-"Bond G17"(one of liqud glue in Japan) 100ml
-Liquid instant glue 16pieces
-"Black instant glue(one of instant glue in Japan) 1piece
-Hot melt(glue gun) 30pieces (When you use a Air duster for cooling, it's convenient)
-Iron gardening stick 1piece
-Velcro 40cm
-Safety pin 2piece
-Rivet 8pieces

[Painting materials]
1.When a undercoat is Gesso
-Gesso 150ml
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*
-Masking tape 1piece
-Surface Primer 1piece

2.When a undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of liqud glue in Japan) 300ml
-lacquer thinner 300ml
-Paintbrush(Disposable premise ) 1piece
-Paper cup,bowl etc.(Disposable premise ) 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*

*The paiting area is written in the package, refer it. Details are here.

Materials cost for making all parts
10000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Soldering iron and soldering iron stand
-Saw or Pipe cutter
-Sand paper(240grit)
-Paint tools, such as a paintbrush
-Pliers
-Punch and hammer
-Tool set required for rivet
-Sewing machine

Convenient tools when you have
-Art knife PRO
-Instant glue Accelerator
This spary can harden Instant glue instantly. Details are here.
100ml 180ml 420ml

Work time for making all parts
160hours

Spec
-

Template
I threw away the Templates, so I can't upload.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

How to make



Thigh armor


Knee armor


Dual swords


Sheath
Digest movie











Return to Top page