MAIL
I have facebook.
I'm writting about new props in English.

TIGER & BUNNY
Origami Cyclone
How to make mask (with templates)



Materials
[Materials for making templates]
-Drawing paper 10sheets
-"Kousakuyousi"(one of hard paper in Japan) 5sheets
-Scotch tape(Sellotape) 3pieces
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→2mm or 1.5mm thick 100cm X 40cm
→5mm thick 100cm X 40cm
-Synthetic leather 100cm X 50cm
-"Bond G17"(one of liqud glue in Japan) 100ml
-Liquid instant glue 5pieces
-Hot melt(glue gun) 10pieces (When you use a Air duster for cooling, it's convenient)
-cord 1m

[Painting materials]
1.When a undercoat is Gesso
-Gesso 100ml
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*

2.When a undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of liqud glue in Japan) 200ml
-lacquer thinner 100ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*

*The paiting area is written in the package, refer it. Details are here.

Materials cost
3000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Paint tools, such as a paintbrush

Convenient tools when you have
-Art knife PRO
-Heat gun
-Instant glue Accelerator
This spary can harden Instant glue instantly. Details are here.
←100ml ←180ml ←420ml

Work time
20hours

Spec
-

Template

PDF format(A4 size) JPG fomat
1/3 sinciput Click Click
2/3 face Click Click
3/3 the back of the head Click Click

When you use templates, please subscribe my youtube channel.
Click this↓ And Click "subscribe".

-If you print on browser, it may not be full scale. You should save the file on your PC, then print the file.
-In case of PDF format, use Adobe Reader(free ware).
-In case of JPG format, When you print it by magnification 100%, it will be full scale.
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue.
-Size:Free size
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

How to make
Make Templates from Drawing paper and "Kousakuyousi"(one of hard paper in Japan).
When you make Templates of the head, use a mannequin head.
When you want to know detailed tutorial of making Templates, browse this page.







Repeat cutting and pasting.


Repeat cutting and pasting.


Repeat cutting and pasting.


Repeat cutting and pasting.


Repeat cutting and pasting.


When you make a ideal from, cut open it. Use it.


Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


**********************************************************************

EVA foam is a soft material.
You can process it easily.
Another name is EVA board, EVA zote, Craft foam etc.
I usually use one called "Lion board".
"Lion board" is sold only in Japan.

Watch video.

**********************************************************************


【5mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私もこの商品を使っています。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【5mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買う】


【5mm厚COSボードを楽天で買う】


【5mm厚COSボードをネット通販で買う】


**********************************************************************

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

When you cut, put EVA foam on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Art knife PRO for small ornaments etc.

**********************************************************************


Glue with a Liquid instant glue.
When you use a Instant glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)


**********************************************************************


Instant glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch movie.

Instant glue Accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About instant glue
I use general liquid Instant glue.


Case of sticking except instant glue.
"Bond G17"(one of liqud glue in Japan) can glue too. It's can glue narrow surfaces too.
But it's take time.
Moreover, when you use Thinned "Bond G17"(one of liqud glue in Japan) as a undercoat,
glued surfaces may melt.
(If you use Gesso, there is no problem.)

**********************************************************************


Reinforce by heaping a Hot melt(glue gun) on the backside of glueing places.
Glue Cloth or Synthetic leather on points with burdens.



Copy the edges of Templates on a material with a pen.
Cut out 2mm or 1.5mm thick EVA foam.


【1.5mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私もこの商品を使っています。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【1.5mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買う】


【1.5mm厚COSボードを楽天で買う】


【1.5mm厚COSボードをネット通販で買う】


Glue Synthetic leather on the backside with a "Bond G17"(one of liqud glue in Japan) for reinforcement. Detailed process is here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.





Glue with a Liquid instant glue.


Glue with a Liquid instant glue.


Make a hole with a Box cutter.


Cut 2mm or 1.5mm thick EVA foam thin.


Glue with a Liquid instant glue.


Glue with a Liquid instant glue.


Bend by heating with a Lighter or a Heat gun.

←ガス充填式ライターとガスボンベを使うとお得


Glue with a Liquid instant glue.


Glue with a Liquid instant glue.


Glue with a Liquid instant glue.


Copy the edges of Templates on a material with a pen.
Cut out 2mm or 1.5mm thick EVA foam.


Cut 2mm or 1.5mm thick EVA foam thin.


Glue with a Liquid instant glue.


Glue with a Hot melt(glue gun).


Copy the edges of Templates on a material with a pen.
Cut out 2mm or 1.5mm thick EVA foam.


Glue with a Liquid instant glue.


Cut out with a Punch.

←手で押しこむだけでお手軽なタイプ←ハンマーで叩くタイプ

Glue with a Liquid instant glue.


Glue with a Liquid instant glue.


Glue with a Liquid instant glue.


Paste cord.
Glue with a Liquid instant glue.


Glue with a Liquid instant glue.


Glueing was completed.


Bend by heating with a Lighter or a Heat gun.


Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


Mark pattern with a pen and the Templates.


Marking was completed.


Cut out for making a hollow.


Shift the position. Glue with a Liquid instant glue.


Shift the position. Glue with a Liquid instant glue.


Glue with a Liquid instant glue.
Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)


Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


Shave the corner with a Box cutter.


Glue with a Liquid instant glue.


Glue with a Liquid instant glue.


Cut 2mm or 1.5mm thick EVA foam thin.


Copy the edges of Templates on a material with a pen.
Cut out 2mm or 1.5mm thick EVA foam.


Glue with a Liquid instant glue.


Heap a Hot melt(glue gun) for reinforcement.


Glue with a Liquid instant glue.


Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


Cut the corner into slant with a Box cutter.


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)


Make holes for sight.
Make a hole with a Box cutter.


Paint a undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.

There are two methods.
-------------------------------------------------------------------------------------------
1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan). (Moving parts in particular)
-It can't use for PVC pipe or plastic sheets.

【Recommendation】
-Weapons
-Armors without a moving part.

【Undercoat】
Gesso or Black Gesso
or

【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or
-------------------------------------------------------------------------------------------
2.Thinned "Bond G17"(one of liqud glue in Japan)
This is difficult.

【Merit】
-It's sold in D.I.Y shops.
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-You must thin it.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Recommendation】
-All props
(Props with a moving part in particular)

【Tutorial video】


【Undercoat】
"Bond G17"(one of liqud glue in Japan) thined with lacquer thinner
-for big things -for small things

【Paint】
Lacquer Spray or Bottle lacquer paint

-------------------------------------------------------------------------------------------

I use Thinned "Bond G17"(one of liqud glue in Japan) in this tutorial.
But I recommend Gesso for begginers.


Paint "Bond G17"(one of liqud glue in Japan) thined with lacquer thinner three or four times.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(It will char in seconds.)
Dry it about 2 ~ 6 hours.


Paint gray color as undercoat color with Lacquer Spray.


Paint white color with Lacquer Spray.


Paint gold of Bottle lacquer paint with a paint brush.
Paint red color of Bottle lacquer paint with a paint brush.


When you paint Bottle lacquer paint, use a paintbrush,silicon cup(Use as a paint plate. It can easy to peel paints after dry.),
panint stick, thinner.


Paint black color of Bottle lacquer paint with a paint brush.


Paint blue with Lacquer Spray.


Actually, I used a Airbrush.
If you want to make light and shade, use it.
About Airbrush is here.

←初心者にもオススメのセット、私も愛用してます。

Paint gold of Bottle lacquer paint with a paint brush.


Paint black with Lacquer Spray.


Paint gold Bottle lacquer paint by Drybrush painting.
(Drybrush painting is easy, you can do it with a paint brush. Details are here.)


Glue with a Hot melt(glue gun).


Paint red color of Bottle lacquer paint with a paint brush.


Glue with a Hot melt(glue gun).


Glueing was completed.


Please
I'm making Yotube videos.
Please watch them and please subscribe my channel.
Click this↓ And Click "subscribe".



















Visitor's works
【キバっちさん Twitter
マスクの塗装に関しましては、サイトの塗装方法を参考にさせていただきました!
一度ご質問をさせていただいた際にもご丁寧に回答していただき、大変お世話になりました!
改めて、ありがとうございます!
作成途中の画像も添付させていただきます(ジェッソ、スプレー塗装、ヒートプレス)
改めまして、本当にありがとうございました!




Return to Top page