MAIL
I have facebook.
I'm writting about new props in English.

Monster Hunter series
"Hunter Soubi"
How to make Body armor (with templates)



Materials
[Materials for making pattern paper]
-Drawing paper 15piece
-Scotch tape(Sellotape) 3piece
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→2mm or 1.5mm thick 100cm X 10cm
→5mm thick 100cm X 120cm
-"Bond G17"(one of liqud glue in Japan) 100ml
-Liquid instant glue 5pieces
-Hot melt(glue gun) 10piece(It's convenient if there is also Air duster for cooling))
-Velcro 80cm

[Painting materials]
-"Bond G17"(one of liqud glue in Japan) 300ml
-lacquer thinner 300ml
-Paintbrush(Disposable premise ) 1piece
-Paper cup,bowl etc.(Disposable premise ) 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*
-Masking tape 1piece
-Paper clay 1piece
-Potato starch 1bag

*Paiting are is written in the package, refer it. Detail is here.

Materials cost
4000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Sizzer
-Box cutter(It's good to change "Pro blade". Moreover,It will become convenient if there is also "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Paint tools, such as a paintbrush

Convenience tools when you have
-Art knife PRO
-Instant glue Accelerator
This spary can harden Instant glue instantly.
It's so useful for glueing small part. Detail is here.
←100ml ←180ml ←420ml

Work time
18Hours

Spec
-

Pattern paper data
PDF format(A4 size) or JPG format

When you use templates, please subscribe my youtube channel.
Click this↓ And Click "subscribe".

-It don't become full scale, if you print on browser. You should save the file on your PC, then print the file.
-In case of PDF format Use Adobe Reader(free ware)
-In case of JPG format it will become full scale, If it print by magnification 100%.
-It becomes easy to use by sticking it to Drawing paper with spray glue after printing.
-Size:Man M size(Adjust if needed)
-Grid in edge of pattern paper is standard that confirm about printing by magnification 100%.
-Mention called "x1","x2" etc are number of cutting pieces.
If you need both shoulder ,both legs etc,cut number of double.
-Mention called "2mm","5mm" etc are thick of EVA foam.

Attention at the time of work
Let's consider the following things for accident prevention and health.

-When it uses a thing including the thinner(Bond, lacquer thinner etc) and the spray, make good ventilation.
And wear a gas mask and .
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-Do not use the lighter and tools with heart near the things which are easy to burn such as paint or thinner Bond.

-Turn off an outlet and the switch of the tool as soon as you have finished using it.

-Read labels of materials and tools carefully, and understand how to use.

How to make
Make Templates from Drawing paper.
Wrap a Drawing paper and fix with Packaging tape.



Cut open it. And wear to a torso.
Repeat cutting and pasting.
When you make Templates of the body, use a torso.



Cut open.
Copy to new Drawing paper and make a fair copy.
Repeat cutting and pasting.


When you make a ideal from, cut open it. Use it.
When you want to know detailed tutorial of making Templates, browse this page.


Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


**********************************************************************

EVA foam is a soft material.
You can process it easily.
Another name is EVA board, EVA zote, Craft foam etc.
I usually use one called "Lion board".
"Lion board" is sold only in Japan.

Watch video.

**********************************************************************


【5mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私がライオンボードを使う場合はリアラボードという商品名の物を使用しています。
こちらは通常&特大サイズ。お買い得な複数枚セット商品も有り。


ハーフサイズ。お買い得な複数枚セット商品も有り。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【5mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買うなら】


【5mm厚COSボードをネット通販で買う】


【5mm厚COSボードを楽天市場で買う】


**********************************************************************

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

When you cut, put EVA foam on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Art knife PRO for small ornaments etc.

**********************************************************************


Mark pattern with a pen and the Templates.


Make plates.
Cut out 2mm or 1.5mm thick EVA foam.
Mark pattern with a pen and the Templates.


【1.5mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私がライオンボードを使う場合はリアラボードという商品名の物を使用しています。
こちらは通常&特大サイズ。お買い得な複数枚セット商品も有り。


ハーフサイズ。お買い得な複数枚セット商品も有り。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【1.5mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買うなら】


【1.5mm厚COSボードをネット通販で買う】


【1.5mm厚COSボードを楽天市場で買う】


Cut out 2mm or 1.5mm thick EVA foam to marks.


Cutting was completed.


Glue plates.
Glue with a Liquid instant glue.
When you use a Instant glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)


*******************************************************************************************


Instant glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch movie.

Instant glue Accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About instant glue
I use general liquid Instant glue.


Case of sticking except instant glue.
"Bond G17"(one of liqud glue in Japan) can glue too. It's can glue narrow surfaces too.
But it's take time.
Moreover, when you use Thinned "Bond G17"(one of liqud glue in Japan) as a undercoat,
glued surfaces may melt.
(If you use Gesso, there is no problem.)

*******************************************************************************************


Glue with a Liquid instant glue.


Glueing was completed.


Glue with a Liquid instant glue.


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)
Heat with Gas toach and bend.
(A Lighter is usable, too But take time.)

←ガス充填式ライターとガスボンベを使うとお得



Make ornament parts.
Cut out 5mm thick EVA foam.
Cut out closs patern.


Shift the position. Glue with a Liquid instant glue.


The hollow was made.


Glue with a Liquid instant glue.


Glue Velcro with "Bond G17"(one of liqud glue in Japan) or a Hot melt(glue gun). Detailes are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
Reinforce by heaping a Hot melt(glue gun) on the backside of glueing places.
Glue Cloth or Synthetic leather on points with burdens.





Paint a undercoat on EVA foam.
Paint Thinned "Bond G17"(one of liqud glue in Japan). Details are here.


Paint "Bond G17"(one of liqud glue in Japan) thined with lacquer thinner three or four times.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(It will char in seconds.)
Dry it about 2 ~ 6 hours.


Make a characteristic skin.
Mix a paper cray and "Bond G17"(one of liqud glue in Japan).



Paint mixed one.
Paint "Bond G17"(one of liqud glue in Japan) thined with lacquer thinner three or four times.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(It will char in seconds.)
Dry it about 2 ~ 6 hours.


Paint Bottle lacquer paint with a Airbrush.

←初心者にもオススメのセット、管理人も使ってます。

Painting was completed.


Paste ornament parts. Glue with a Liquid instant glue.


Please
I'm making Yotube videos.
Please watch them and please subscribe my channel.
Click this↓ And Click "subscribe".











The red circle is the parts which I made in this time.


The red circle is the parts which I made in this time.


Visitor's works
時乃秋哉さん
ギャクヨガ様のサイトに記載されているプレートアーマーを元に
アルスラーン戦記の鎧を制作させていただきました。
何が必要なのかや注意点などがわかりやすく型紙もDRできてとても助かりました!
有難う御座いました!


Return to Top page