My Youtube channel moved this URL.
New Youtube Channel
Please subscribe again.
I'll upload videos this channell after this.
My profile

How to make Faraam Set(with templates)

Materials for making all parts
[Materials for making templates]
-Drawing paper 10sheets
-"Kousakuyousi"(one of hard paper in Japan) 5sheets
-Tracing paper 300cm
-Scotch tape(Sellotape) 3pieces
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→2mm or 1.5mm thick 100cm X 10cm
→5mm thick 100cm X 50cm
→10mm thick 100cm X 50cm
-"Kousakuyousi"(one of hard paper in Japan) 4sheets
-Synthetic leather 100cm X 20cm
-Cloth 100cm X 20cm
-Fur 10cmm X 20cm
-"Bond G17"(one of liqud glue in Japan) 100ml
-Liquid super glue 5pieces
-Hot melt(glue gun) 10pieces (When you use a Air duster for cooling, it's convenient)
-Velcro 40cm
-cord 10m
-Rivet 10pieces
-Snap 10pieces
-Eyelet 10pieces
-Buckle 5pieces
-Thin gloves 1pair
-Zipper 1piece

[Painting materials]
1.When a undercoat is Gesso
-Gesso 300ml
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*
-Masking tape 1piece

2.When a undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of liqud glue in Japan) 600ml
-lacquer thinner 600ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*
-Masking tape 1piece

*The paiting area is written in the package, refer it. Details are here.

Materials cost for making all parts
7000Yen (about 100Yen = 1dollar)

-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Soldering iron and soldering iron stand
-Masking tape 1piece
-Paint tools, such as a paintbrush
-Punch and hammer
-Tool set required for rivet
-Tool set required for snap
-Eyelet punch
-Sewing machine
-Sewing tools

Convenient tools when you have
-Art knife PRO
-Super glue Accelerator

Work time for making all parts


Template data

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

How to make


Body armor

Neck cloth

Shoulder armor

Elbow armor


Gloves armor

Waist cloth



Boots cover
Digest movie

How to wear

I'm making Yotube videos.
Please watch them and please subscribe my YouTube channel.
These are new videos.

Visitor's works
James Thomasさん
Thank you for helping me make my first ever foam build for a local convention!
I couldn't have done it without your sites guidance


Return to Top page