I have facebook.
I'm writting about new props in English.

How to make Batman in american comic (with pattern)

Materials to make complete set
[Materials for making pattern paper]
-Drawing paper 10sheets
-"Kousakuyousi"(one of hard paper in Japan) 5sheets
-Tracing paper 300cm
-Scotch tape(Sellotape) 3pieces
-Packaging tape(parcel tape) 1piece

[Main materials]
-"Lion Board(Koyo Soft Board)"
→2mm thick(1.5mm is also OK) 100cm X 50cm
→5mm thick 100cm X 200cm
→10mm thick 100cm X 10cm
-Synthetic leather 100cm X 100cm
-Cloth 100cm X 250cm
-"Bond G17"(one of liqud glue in Japan) 150ml
-Liquid instant glue 10pieces
-Hot melt(glue gun) 100pieces (It's convenient if there is also Air duster for cooling)
-Wire 30cm
-Velcro 400cm
-Eyelet 12pieces
-Buckle 12pieces
-Shoes 1piece

[Painting materials]
1.Case of Gesso painting
-Gesso 600ml
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*
-Masking tape 1piece

2.Case of "Bond G17" painting
-"Bond G17"(one of liqud glue in Japan) 1200ml
-lacquer thinner 1200ml
-Paintbrush(Disposable premise ) 1piece
-Paper cup,bowl etc.(Disposable premise ) 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*
-Masking tape 1piece

*Paiting are is written in the package, refer it. Detail is here.

Materials cost to make complete set
21000Yen (about 100Yen = 1dollar)

-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Box cutter(It's good to change "Pro blade". Moreover,It will become convenient if there is also "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Soldering iron and soldering iron stand
-Paint tools, such as a paintbrush
-The sharp things, such as Pinvice or Prick punch
-Punch and hammer
-Tool set required for rivet
-Sewing machine
-Sewing tools

Convenience tools when you have
-Art knife PRO
-Instant glue Accelerator
This spary can harden Instant glue instantly.
It's so useful for glueing small part. Detail is here.
←100ml ←180ml ←420ml

Work time to make complete set


Pattern paper data

Attention at the time of work
Let's consider the following things for accident prevention and health.

-When it uses a thing including the thinner(Bond, lacquer thinner etc) and the spray, make good ventilation.
And wear a gas mask and .
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-Do not use the lighter and tools with heart near the things which are easy to burn such as paint or thinner Bond.

-Turn off an outlet and the switch of the tool as soon as you have finished using it.

-Read labels of materials and tools carefully, and understand how to use.

How to make


Bat suits
upper half of the body

Bat suit
lower half of the body




Digest movie

Visitor's works


Return to Top page