Nov.7
My Youtube channel moved this URL.
New Youtube Channel
Please subscribe again.
I'll upload videos this channell after this.
My profile

Sengoku Basara
Nobunaga Oda
How to make Shoes armore



Materials
[Materials for making templates]
-Drawing paper 10piece
-"Kousakuyousi"(one of hard paper in Japan) 5piece
-Scotch tape(Sellotape) 3piece
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→2mm or 1.5mm thick 100cm X 20cm
→5mm thick 100cm X 20cm
→10mm thick 100cm X 20cm
-"Bond G17"(one of liqud glue in Japan) 100ml
-Liquid super glue 5pieces
-Hot melt(glue gun) 10piece(When you use a Air duster for cooling, it's convenient))
-Velcro 10cm
-High heels

[Painting materials]
1.When a undercoat is Gesso
-Gesso 100ml
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*

2.When a undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of liqud glue in Japan) 200ml
-lacquer thinner 200ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*
-Masking tape 1piece

*The paiting area is written in the package, refer it. Details are here.

Materials cost
5000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Soldering iron and soldering iron stand
-Paint tools, such as a paintbrush

Convenient tools when you have
-Art knife PRO
-Heat gun
-Super glue Accelerator

Work time
9Hours

Spec
-

Template data
I threw away the Templates, so I can't upload.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.


-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

How to make
Use this heel as a base.


Cut off fitting belt.
Make the surface rough with a Box cutter. Then It becomes easy to glue.


Glue Velcro with "Bond G17"(one of liqud glue in Japan) or a Hot melt(glue gun). Detailes are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.





Make Templates from Drawing paper and "Kousakuyousi"(one of hard paper in Japan).
Repeat cutting and pasting.
When you want to know detailed tutorial of making Templates, browse this page.





When you make a ideal from, cut open it. Use it.


Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.
Cut out 2mm or 1.5mm thick EVA foam.


**********************************************************************

EVA foam is a soft material.
You can process it easily.
Another name is EVA board, EVA zote, Craft foam etc.
I usually use one called "Lion board".
"Lion board" is sold only in Japan.

Watch video.

**********************************************************************


-------------------------------------------------------------------------------------------------------
【5mm厚ライオンボード(別名:リアラボード)】


楽天なら


【5mm厚COSボード】


【コスプレボード】
楽天なら


Amazonならこちら
-------------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------
【1.5mm厚ライオンボード(別名:リアラボード)】


楽天なら


【1.5mm厚COSボード】


【コスプレボード】
楽天なら


Amazonならこちら
-------------------------------------------------------------------------------------------------------

**********************************************************************

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

When you cut, put EVA foam on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Art knife PRO for small ornaments etc.

**********************************************************************


Make a parts of tip of a toe.
Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)


**********************************************************************


Super glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch video.


Super glue accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About super glue
I use general liquid super glue.

**********************************************************************


Glueing was completed.


Mark pattern with a pen and the Templates.


Mark pattern with a pen and the Templates.


Glue with a Liquid super glue.


Cut out 5mm thick EVA foam.
Glue with a Liquid super glue.


Dig marked pattern with a Soldering iron.(Don't breathe in the smoke and don't put in eyes)



Make instep plates.
Glue Synthetic leather on the backside with a "Bond G17"(one of liqud glue in Japan) for reinforcement. Detailed process is here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.





Glueing was completed.


Make rivets with a Hot melt(glue gun).


Glue Synthetic leather on the backside with a "Bond G17"(one of liqud glue in Japan) for reinforcement. Detailed process is here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.



Glue with a Liquid super glue.


Glueing was completed.


Make heel plates.


Make rivets with a Hot melt(glue gun).


Bend by heating with a Lighter or a Heat gun.

←ガス充填式ライターとガスボンベを使うとお得


Begin painting.
At first, paint a undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.

There are two methods.
-------------------------------------------------------------------------------------------
1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.
-There are several colors one, white black etc.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan).
 Then, use this for weapons and armors without moving parts.
-The gross is smaller than Thinned "Bond G17"(one of liqud glue in Japan).

【Commodities page】
Gesso or Black Gesso
or

【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or
-------------------------------------------------------------------------------------------
2."Bond G17"(one of liqud glue in Japan)
This is difficult, however it's almighty.

【Merit】
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-"Bond G17" is japanese commodity.
 Then you can't get it easily.
 Please use others. For example, you can substitute wood glue for it.
-You must thin it with lacquer thinner.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Tutorial video】


【Commodities page】
"Bond G17"(one of liqud glue in Japan) thined with lacquer thinner
-for big things -for small things
-------------------------------------------------------------------------------------------
-About paint
I use following paint.


You can use acrylic paint, when you use Gesso.

-------------------------------------------------------------------------------------------

I use Thinned "Bond G17"(one of liqud glue in Japan) in this tutorial.
But I recommend Gesso for begginers.


Paint "Bond G17"(one of liqud glue in Japan) thined with lacquer thinner three or four times.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(It will char in seconds.)
Dry it about 2 ~ 6 hours.


Paint black color as undercoat color with Lacquer Spray.


Paint Bottle lacquer paint by Drybrush painting.
Drybrush painting is easy, you can do it with a paint brush.
Read here or watch this video.


When you paint Bottle lacquer paint, use a paintbrush,silicon cup(Use as a paint plate. It can easy to peel paints after dry.),
panint stick, thinner.


Painting was completed.


Make the surface rough with a Box cutter. Then It becomes easy to glue.


Glue with a Hot melt(glue gun).


Glue with a Hot melt(glue gun).


Glue with a Hot melt(glue gun).


Glue with a Liquid super glue.


Glueing was completed.


Glue with a Hot melt(glue gun).


Please
I'm making Yotube videos.
Please watch them and please subscribe my YouTube channel.
These are new videos.










Turn over the instep plate when it wear shoes.


The red circle is the parts which I made in this time.


The red circle is the parts which I made in this time.


Visitor's works
ケイさん
ギャクヨガさんの靴防具を参考にファンタジー風の靴を作りました!
履きやすいように最後のパーツだけマジックテープで貼り付けた!


Return to Top page