My profile

Fate/Grand Order
How to make Berserk's armor (with templates)

Materials for making all parts
[Materials for making templates]
-Drawing paper 10sheets
-"Kousakuyousi"(one of hard paper in Japan) 5sheets
-Tracing paper 300cm
-Scotch tape(Sellotape) 3pieces
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→2mm or 1.5mm thick 100cm X 150cm
→5mm thick 100cm X 250cm
→10mm thick 100cm X 20cm
-Synthetic leather 100cm X 50cm
-Clear color plastic sheets 100cm X 40cm
-"Bond G17"(one of liqud glue in Japan) 150ml
-Liquid super glue 15pieces
-"Black instant glue(one of instant glue in Japan) 1piece
-Polyester putty 100g
-Hot melt(glue gun) 105pieces (When you use a Air duster for cooling, it's convenient)
-"Jiyujizai"(one of wire in Japan)
→6mm diameter 50cm
-Velcro 400cm
-Thin gloves 1pair
-Zipper 2piece
-Tools and materials for a both side silicon mold

[Painting materials]
Painting method in this time
-Natural sand 600ml

Below are standart method.
1.When a undercoat is Gesso
-Gesso 600ml
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*
-Masking tape 1piece

2.When a undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of liqud glue in Japan) 1200ml
-lacquer thinner 1200ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*
-Masking tape 1piece

*The paiting area is written in the package, refer it. Details are here.

Materials cost for making all parts
25000Yen (about 100Yen = 1dollar)

-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Soldering iron and soldering iron stand
-Paint tools, such as a paintbrush
-Sewing machine
-Sewing tools
-Tools for processing plastic sheets(sandpaper etc)

Convenient tools when you have
-Art knife PRO
-Super glue Accelerator

Work time for making all parts


Template data

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

How to make templates



Body armor

Belt accesary


Shoulder armor

Upper arm armor


Gloves armor

Thigh armor

Knee armor

Shin armor

Shoes armor
Digest movie

Visitor's works
【BAD真人さん Twitter


Return to Top page