Fate/Zero
Fate/Grand Order
Berserk's armor
How to make accesary



Materials
[Materials for making templates]
-"Kousakuyousi"(one of hard paper in Japan) 5sheets
-Scotch tape(Sellotape) 3pieces
-Packaging tape(parcel tape) 1piece

[Main materials]
-"Kousakuyousi"(one of hard paper in Japan) 4sheets
-Plastic sheets 0.5mm thick 1sheets
-Synthetic leather 100cm X 50cm
-"Bond G17"(one of sticky glue in Japan) 100ml
-Liquid super glue 1pieces
-"Black instant glue(one of instant glue in Japan) 1piece
-Polyester putty 50g
-Velcro 60cm
-Tools and materials for a both side silicon mold

[Painting materials]
-Lacquer Spray proper quantity*

*The paiting area is written in the package, refer it. Details are here.

Materials cost
2000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter etc(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Paint tools (brush etc)
-Drill or Pinvice
-Tools for processing plastic sheets(sandpaper etc)

Convenient tools when you have
-Standard art knife,Cushion grip art knife
-Super glue Accelerator

Work time
13hours

Spec
-

Template data
I threw away the Templates, so I can't upload.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

Make the template
Make Templates from "Kousakuyousi"(one of hard paper in Japan).
When you want to know how to make Templates, browse this page.



Please support me by donating
If my tutorials supports you, please support me.
You can donate to me with PayPal.
I'm gonna use donation to make new props, thanks.
Click this ↓.


Thanks for donating from donation form! xxCatnip-san!
I'm so glad my Longinus tutorial helped you!


Thanks for donating from donation form! killercredo-san!
I'm so glad my Tengen utorial helped you!


Thanks for donating from donation form! Talengard-san!
I'm so glad my tutorials helped you!
Please enjoy cosplay of Jujutsu Kainsen(*^^*)


More history

Building
Cut material into the Templates form.
Cut out 0.5mm thick Plastic sheets.



Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)





Super glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch video.


Super glue accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←420ml

About super glue
I use general liquid super glue.



Cut out 0.5mm thick Plastic sheets.


Glue with a Liquid super glue.


Heap Polyester putty.



Wait untile hardening.


Form by shaving with a Box cutter etc.


Heap Polyester putty.


Wait untile hardening.


Polish with Sand paper of around 400grit.


Heap Polyester putty.


Paint lacquer putty thined lacquer thinner.



Polish with Sand paper of around 400grit.


Spray Surface Primer.



Cracks and hollows stand out after drying.
If there are cracks and hollows yet, repeat heaping and polishing.


Duplicate by double side silicon mold.
Details of duplicating parts with a double side silicon mold are here.







Set frames.
Pour silicon.
Details of duplicating parts with a double side silicon mold are here.







Take off frames when silicon hardens.
Details of duplicating parts with a double side silicon mold are here.


Details of duplicating parts with a double side silicon mold are here.


Take off frames when silicon hardens.
Details of duplicating parts with a double side silicon mold are here.


Duplicate by casting resin.
Details of duplicating parts with a double side silicon mold are here.


Duplicate by casting resin.
Details of duplicating parts with a double side silicon mold are here.



Duplicate by casting resin.
Details of duplicating parts with a double side silicon mold are here.


Duplicate by casting resin.
Details of duplicating parts with a double side silicon mold are here.


Clean surface by "bure-kuri-n(one of Jpanese cleaning riquid for industrial use) ".
Details of duplicating parts with a double side silicon mold are here.



Make a belt.
Paste together two Synthetic leathers.
Glue with "Bond G17"(one of sticky glue in Japan).










Cut out Synthetic leather.


I finished cutting.


Sew Velcro with a sewing machine.



Make hole with a Drill or a Pinvice.



Heap "Black instant glue(one of instant glue in Japan) on cracks and flaws.



Polish with Sand paper of around 400grit.


Insert belts.
Serve "Black instant glue(one of instant glue in Japan).


Stick Masking tape on the point you don't want to paint.


ギャクヨガは細かいところは10mm幅(左の商品)、広い所は30mm幅(右の商品)を使ってます

Please subscribe and follow
Please subscribe my channel!


Please follow my twitter!


Painting
Splay Surface Primer for casting resin.
Details are here.



Paint with Lacquer Spray.


Actually, I used a Airbrush too.
If you want to make light and shade, use it.
About Airbrush is here.





●初心者にオススメ
安価なUSB充電式エアブラシ。
これ一つでエアブラシ塗装が手軽に行えます、60分充電すれば45分稼働できます。
エアブラシ塗装を手軽に始めるならまずはこれ。


●本格的に始めるなら
Mr.カラーを作っているクレオスのエアブラシセットです。
エアブラシ塗装に必要なものが一式セットになった定番商品です。
ギャクヨガも昔使ってました。
電源はコンセント接続です。



●ギャクヨガが使っている物を使いたいなら
性能は高いですが高価です。
ホースは別途購入が必要です。



Complete












About using for business
When you use my contents for business, follow this rule.