MAIL
I have facebook.
I'm writting about new props in English.

Trinity Blood
Abel Nightroad(ROM volume 7 version)
How to make Revolver



Materials
[Materials for making pattern paper]
-"Kousakuyousi"(one of hard paper in Japan) 5piece
-Scotch tape(Sellotape) 5piece
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→2mm or 1.5mm thick 100cm X 20cm
→5mm thick 100cm X 20cm
→10mm thick 100cm X 30cm
-Liquid instant glue 5pieces
-Hot melt(glue gun) 10piece(It's convenient if there is also Air duster for cooling))

[Painting materials]
1.When a undercoat is Gesso
-Gesso 50ml
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*

2.When a undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of liqud glue in Japan) 100ml
-lacquer thinner 100ml
-Paintbrush(Disposable premise ) 1piece
-Paper cup,bowl etc.(Disposable premise ) 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*
-Masking tape 1piece

-Bottle lacquer paint proper quantity*

*Paiting are is written in the package, refer it. Detail is here.

Materials cost
2000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Sizzer
-Box cutter(It's good to change "Pro blade". Moreover,It will become convenient if there is also "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Paint tools, such as a paintbrush

Convenience tools when you have
-Art knife PRO
-Instant glue Accelerator
This spary can harden Instant glue instantly.
It's so useful for glueing small part. Detail is here.
←100ml ←180ml ←420ml

Work time
6Hours

Spec
-

Templates
I threw away the Templates, so It's can't upload.

Attention at the time of work
Let's consider the following things for accident prevention and health.

-When it uses a thing including the thinner(Bond, lacquer thinner etc) and the spray, make good ventilation.
And wear a gas mask and .
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-Do not use the lighter and tools with heart near the things which are easy to burn such as paint or thinner Bond.

-Turn off an outlet and the switch of the tool as soon as you have finished using it.

-Read labels of materials and tools carefully, and understand how to use.

How to make
Scan an illustration with a scanner and zoom it. Use it as Templates.


Copy the edges of Templates on a material with a pen.
Cut out 10mm thick EVA foam.


**********************************************************************

EVA foam is a soft material.
You can process it easily.
Another name is EVA board, EVA zote, Craft foam etc.
I usually use one called "Lion board".
"Lion board" is sold only in Japan.

Watch video.

**********************************************************************


【10mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私がライオンボードを使う場合はリアラボードという商品名の物を使用しています。
こちらは通常&特大サイズ。お買い得な複数枚セット商品も有り。


ハーフサイズ。お買い得な複数枚セット商品も有り。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【10mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買うなら】


【10mm厚COSボードをネット通販で買う】


【10mm厚COSボードを楽天市場で買う】


**********************************************************************

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

When you cut, put EVA foam on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Art knife PRO for small ornaments etc.

**********************************************************************


Cut out with a Box cutter.


Cut out 5mm thick EVA foam.
【5mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私がライオンボードを使う場合はリアラボードという商品名の物を使用しています。
こちらは通常&特大サイズ。お買い得な複数枚セット商品も有り。


ハーフサイズ。お買い得な複数枚セット商品も有り。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【5mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買うなら】


【5mm厚COSボードをネット通販で買う】


【5mm厚COSボードを楽天市場で買う】


Glue with a Liquid instant glue.
When you use a Instant glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)


*******************************************************************************************


Instant glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch movie.

Instant glue Accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About instant glue
I use general liquid Instant glue.


Case of sticking except instant glue.
"Bond G17"(one of liqud glue in Japan) can glue too. It's can glue narrow surfaces too.
But it's take time.
Moreover, when you use Thinned "Bond G17"(one of liqud glue in Japan) as a undercoat,
glued surfaces may melt.
(If you use Gesso, there is no problem.)

*******************************************************************************************


Cut out 5mm thick EVA foam.
Glue with a Liquid instant glue.


Cut out 10mm thick EVA foam.
Make four pieces.
Glue with a Liquid instant glue.


Form by shaving with a Box cutter.


Glue with a Liquid instant glue.


Make the ornament of grip.
Cut out 2mm or 1.5mm thick EVA foam.


【1.5mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私がライオンボードを使う場合はリアラボードという商品名の物を使用しています。
こちらは通常&特大サイズ。お買い得な複数枚セット商品も有り。


ハーフサイズ。お買い得な複数枚セット商品も有り。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【1.5mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買うなら】


【1.5mm厚COSボードをネット通販で買う】


【1.5mm厚COSボードを楽天市場で買う】


Glue with a Liquid instant glue.
Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)
Make rivets with a Hot melt(glue gun).

←ガス充填式ライターとガスボンベを使うとお得



Paint a undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.

There are two methods.
-------------------------------------------------------------------------------------------
1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan). (Moving parts in particular)
-It can't use for PVC pipe or plastic sheets.

【Recommendation】
-Weapons
-Armors without a moving part.

【Undercoat】
Gesso or Black Gesso
or

【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or
-------------------------------------------------------------------------------------------
2.Thinned "Bond G17"(one of liqud glue in Japan)
This is difficult.

【Merit】
-It's sold in D.I.Y shops.
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-You must thin it.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(It will char in seconds.)

【Recommendation】
-All props
(Props with a moving part in particular)

【Undercoat】
"Bond G17"(one of liqud glue in Japan) thined with lacquer thinner
-for big things -for small things

【Paint】
Lacquer Spray or Bottle lacquer paint

-------------------------------------------------------------------------------------------

I use Gesso in this tutorial.


Paint Gesso twice or three times with a brush.
Dry it about 2 ~ 6 hours.


Paint Lacquer Spray and Bottle lacquer paint.
When you paint Bottle lacquer paint, use a paintbrush,silicon cup(Use as a paint plate. It can easy to peel paints after dry.),
panint stick, thinner.


Please
I'm making Yotube videos.
Please watch them and please subscribe my channel.
Click this↓ And Click "subscribe".









The red circle is the parts which I made in this time.


The red circle is the parts which I made in this time.


Return to Top page