My profile

VAMPIRE savior、Darkstalkers 3
Lilith,Morrigan
How to make wasit wing (with templates)



Materials
[Materials for making templates]
-Drawing paper 10sheets
-Scotch tape(Sellotape) 3pieces
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→10mm thick 100cm X 60cm
-Synthetic leather 100cm X 10cm
-"Bond G17"(one of liqud glue in Japan) 50ml
-Liquid super glue 5pieces
-Hot melt(glue gun) 10pieces (When you use a Air duster for cooling, it's convenient)
-Safety pin 6piece
-Fishing line 2m
-Shape of ring metal parts 2pieces
-Materials set for making nails(Detail is here)

[Painting materials]
1.When a undercoat is Gesso
-Gesso 100ml
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*
-Masking tape 1piece

2.When a undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of liqud glue in Japan) 200ml
-lacquer thinner 200ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*
-Masking tape 1piece

*The paiting area is written in the package, refer it. Details are here.

Materials cost
5000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Soldering iron and soldering iron stand
-Sand paper(180grit)
-Paint tools, such as a paintbrush
-Pinvice or Prick punch etc
-Pliers
-Tools set for making nails(Detail is here)

Convenient tools when you have
-Art knife PRO
-Super glue Accelerator

Work time
20hours

Spec
Weight 400g

Template data
PDF format(A4 size)1/2 PDF format(A4 size)2/2

-How to print is here.
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue.
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam.

1/2 Completion drawing


2/2 Completion drawing


Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.


-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

How to make
Make Templates from Drawing paper.
When you want to know detailed tutorial of making Templates, browse this page.



Copy the edges of Templates on a material with a pen.
Cut out 10mm thick EVA foam.


**********************************************************************

EVA foam is a soft material.
You can process it easily.
Another name is EVA board, EVA zote, Craft foam etc.
I usually use one called "Lion board".
"Lion board" is sold only in Japan.

Watch video.

**********************************************************************


-------------------------------------------------------------------------------------------------------
【10mm厚COSボード】


【10mm厚コスプレボード】


楽天なら


【10mm厚ライオンボード(別名:リアラボード)】


楽天なら

-------------------------------------------------------------------------------------------------------

**********************************************************************

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

When you cut, put EVA foam on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Art knife PRO for small ornaments etc.

**********************************************************************


Use a wire.
Cut it with Pliers.
Bend with hands and Pliers.


Paint ink.


Mark.


Marking was completed.


Cut out with a Box cutter.


Cutting was completed.
Don't dump cut one, because cut one is used after.


Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)


**********************************************************************


Super glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch video.


Super glue accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About super glue
I use general liquid super glue.

**********************************************************************


Glueing was completed.


Put the wire.


Glue with a Liquid super glue.


Stick cut one.
Glue with a Liquid super glue.


Glueing was completed.


Cut unnecessary points with Box cutter.


Cutting was completed.


Stick together another one.
Glue with a Liquid super glue.


Copy the edges of Templates on a material with a pen.
Cut out 10mm thick EVA foam.


Dig a ditch with a Box cutter.
Glue with a Liquid super glue.


Glue with a Liquid super glue.


Glueing was completed.


Form by shaving with a Box cutter.


Form by shaving with a Box cutter.


Form by shaving with a Box cutter.


Form by shaving with a Box cutter.


Form by shaving with a Box cutter.


Form by shaving with a Box cutter.


Polish with a 180grit Sand paper.


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)

←ガス充填式ライターとガスボンベを使うとお得

Polish with a 180grit Sand paper.
Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)


Make a break with a Box cutter.


Cut out Synthetic leather.


Pust it to the depth.
Put Safety pin between Synthetic leather.


Glue with a Liquid super glue.


Cut out Synthetic leather.


Glue with a Liquid super glue.


Stick together red an blue Synthetic leather.


Glue Synthetic leather with "Bond G17"(one of liqud glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.



Copy the edges of Templates on a material with a pen.
Cut out Synthetic leather.
In this time, cut widely 3 mm than Templates.(Make it a tab for sticking)


Cut out Synthetic leather.
In this time, cut widely 3 mm than Templates.(Make it a tab for sticking)


Cutting was completed.


Make a break with a Box cutter.


Make a break with a Box cutter.


Dig a ditch with a Box cutter.


Glue with a Liquid super glue.


Glue with a Liquid super glue.


Glue with a Liquid super glue.


Glue with a Liquid super glue.


Glueing was completed.


Stick Masking tape on the point you don't want to paint.


Use newspaper too.


Begin painting.
At first, paint a undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.

There are two methods.
-------------------------------------------------------------------------------------------
1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.
-There are several colors one, white black etc.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan).
 Then, use this for weapons and armors without moving parts.
-The gross is smaller than Thinned "Bond G17"(one of liqud glue in Japan).

【Commodities page】
Gesso or Black Gesso
or

【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or
-------------------------------------------------------------------------------------------
2."Bond G17"(one of liqud glue in Japan)
This is difficult, however it's almighty.

【Merit】
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-"Bond G17" is japanese commodity.
 Then you can't get it easily.
 Please use others. For example, you can substitute wood glue for it.
-You must thin it with lacquer thinner.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Tutorial video】


【Commodities page】
"Bond G17"(one of liqud glue in Japan) thined with lacquer thinner
-for big things -for small things
-------------------------------------------------------------------------------------------
-About paint
I use following paint.


You can use acrylic paint, when you use Gesso.

-------------------------------------------------------------------------------------------

I use Thinned "Bond G17"(one of liqud glue in Japan) in this tutorial.
But I recommend Gesso for begginers.


Paint "Bond G17"(one of liqud glue in Japan) thined with lacquer thinner three or four times.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(It will char in seconds.)
Dry it about 2 ~ 6 hours.


Paint gray color as undercoat color with Lacquer Spray.


Paint red color with Lacquer Spray.


Actually, I used a Airbrush too.
If you want to make light and shade, use it.
About Airbrush is here.

←初心者にもオススメのセット、私も愛用してます。

Peel Masking tape softly.
Cut the point hard to peel with scissors.


Make hole with a Pinvice or Prick punch etc.



Attach nails.
Glue with a Liquid super glue.
How to make nails is here.


Glueing was completed.


Make hole with a Pinvice or Prick punch etc.


Tie Fishing line.


Tie Shape of ring metal parts.


Please
I'm making Yotube videos.
Please watch them and please subscribe my YouTube channel.
These are new videos.




















How to fit.
Cut out Synthetic leather.


Fit with Safety pin.


Fit with Safety pin.
(You may Fitting it to cloth directly. But Fitting between Synthetic leather is easy more.)


Hang the ring with finger, when you strike pose.


Visitor's works
こもさん
リリス
ヴァンパイアセイヴァー
レオタードはプレデターラットの限定品(まだ売ってるよ)、翼はギャクヨガさんの型紙で製作。
先日大失敗したウィッグとマラボーとメイク見直しました。
去年まではグラマラスなキャラが多かったのですが、今年はこんな感じでさらに無理していきます。


しんげんもちさん
モリガンコス作りました?自撮りしかないです??スタジオ撮影したいです。
羽根型紙→ギャクヨガ様
レオタード型紙→うさこ様@yousaikoubou
を使わせていただきました!ありがとうございます


あきさん
こんばんは。となこすにて、ギャクヨガ様の型紙を使わせていただきました、リリスです。
会場で、とても評判が良かったです。ありがとうございました^_^


がちゃ丸さん
紅魔館あわせ本当楽しかったー!!
あげたい写真あり過ぎるから選びきれない!!ぱちぇこあ健全版よりw
羽はギャクヨガさんのサイトを参考にさせていただきました
お写真はtakeさん


Return to Top page