Nov.7
My Youtube channel moved this URL.
New Youtube Channel
Please subscribe again.
I'll upload videos this channell after this.
My profile

How to make momoiro clover z's boots (with templates)


Materials
[Materials for making templates]
-Drawing paper 10sheets
-"Kousakuyousi"(one of hard paper in Japan) 1sheets
-Scotch tape(Sellotape) 3pieces
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→5mm thick 100cm X 60cm
→10mm thick 100cm X 20cm
-Synthetic leather 100cm X 100cm
-"Bond G17"(one of liqud glue in Japan) 200ml
-Liquid instant glue 6pieces
-Hot melt(glue gun) 10pieces (When you use a Air duster for cooling, it's convenient)
-Velcro 40cm
-Shoes 1piece

[Painting materials]
-Lacquer Spray proper quantity*

*The paiting area is written in the package, refer it. Details are here.

Materials cost
6000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter

Convenient tools when you have
-Art knife PRO
-Heat gun
-Instant glue Accelerator
This spary can harden Instant glue instantly. Details are here.
←100ml ←180ml ←420ml

Work time
31hours

Spec
-

Template
PDF format(A4 size)1/2 PDF format(A4 size)2/2

-If you print on browser, it may not be full scale. You should save the file on your PC, then print the file.
-Print it with Adobe Reader(free ware).
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue.
-Size:Free size
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam.

1/2 Completion drawing


2/2 Completion drawing


Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

How to make
Use this shoes as a base.

Make Templates from Drawing paper.
When you want to know detailed tutorial of making Templates, browse this page.



Repeat cutting and pasting.


Repeat cutting and pasting.


Repeat cutting and pasting.


When you make a ideal from, cut open it. Use it.


Make shoes body part.
Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.
Cut out 10mm thick EVA foam.


**********************************************************************

EVA foam is a soft material.
You can process it easily.
Another name is EVA board, EVA zote, Craft foam etc.
I usually use one called "Lion board".
"Lion board" is sold only in Japan.

Watch video.

**********************************************************************


【5mm厚ライオンボード(別名:リアラボード)】
リアラボードという商品名ですがこれが俗に言うライオンボードです。


楽天なら


【5mm厚COSボード】


【10mm厚ライオンボード(別名:リアラボード)】
リアラボードという商品名ですがこれが俗に言うライオンボードです。


楽天なら


【10mm厚COSボード】


**********************************************************************

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

When you cut, put EVA foam on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Art knife PRO for small ornaments etc.

**********************************************************************


Glue Synthetic leather with "Bond G17"(one of liqud glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.





Glueing was completed.


Glue with a Liquid instant glue.
When you use a Instant glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)


**********************************************************************


Instant glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch movie.

Instant glue Accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About instant glue
I use general liquid Instant glue.


Case of sticking except instant glue.
"Bond G17"(one of liqud glue in Japan) can glue too. It's can glue narrow surfaces too.
But it's take time.
Moreover, when you use Thinned "Bond G17"(one of liqud glue in Japan) as a undercoat,
glued surfaces may melt.
(If you use Gesso, there is no problem.)

**********************************************************************


Glueing was completed.
This is bottom side.


Glue Synthetic leather with "Bond G17"(one of liqud glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.


Glueing was completed.


Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


Glue with a Liquid instant glue.


Glue Synthetic leather with "Bond G17"(one of liqud glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.


Glueing was completed.


Glue with a Liquid instant glue.
(Surrounded part by red circle)


Glueing was completed.


Glue with a Liquid instant glue.


Glueing was completed.


Paste Synthetic leather to the hem.
Glue with a Liquid instant glue.


You can insert shoes into shoes.


Make shin part.
Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


Glue with a Liquid instant glue.


Glue Synthetic leather with "Bond G17"(one of liqud glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.


Glue Velcro with "Bond G17"(one of liqud glue in Japan) or a Hot melt(glue gun). Detailes are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.



Glue with a Liquid instant glue.


Make plates.
Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


Bend by heating with a Lighter or a Heat gun.

←ガス充填式ライターとガスボンベを使うとお得


Glue Synthetic leather with "Bond G17"(one of liqud glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.


Glueing was completed.


Glue with a Liquid instant glue.


Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


Glue with a Liquid instant glue.


Glue with a Liquid instant glue.


Bend by heating with a Lighter or a Heat gun.


Glue Synthetic leather with "Bond G17"(one of liqud glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.


Glue Synthetic leather with "Bond G17"(one of liqud glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.


Glue with a Liquid instant glue.


Paint with Lacquer Spray.


Glue with a Liquid instant glue.


Please
I'm making Yotube videos.
Please watch them and please subscribe my channel.
These are new videos.
























Return to Top page