MAIL
I have facebook.
I'm writting about new props in English.

How to make plague mask (with templates)


Materials
[Materials for making templates]
-Drawing paper 10sheets
-"Kousakuyousi"(one of hard paper in Japan) 5sheets
-Scotch tape(Sellotape) 1piece
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→2mm or 1.5mm thick 100cm X 10cm
→5mm thick 100cm X 40cm
-Clear color plastic sheets 100cm X 10cm
-Liquid instant glue 2pieces
-Hot melt(glue gun) 10pieces (When you use a Air duster for cooling, it's convenient)
-Elastic cord 1piece

[Painting materials]
1.When a undercoat is Gesso
-Gesso 100ml
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*
-Masking tape 1piece

2.When a undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of liqud glue in Japan) 100ml
-lacquer thinner 100ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*
-Masking tape 1piece

*The paiting area is written in the package, refer it. Details are here.

Materials cost
1500Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Soldering iron and soldering iron stand
-Paint tools, such as a paintbrush

Convenient tools when you have
-Art knife PRO
-Circle cutter
-Heat gun
-Instant glue Accelerator
This spary can harden Instant glue instantly. Details are here.
←100ml ←180ml ←420ml

Work time
10hours

Spec
Weight 100g

Template
PDF format(A4 size) or JPG format

When you use templates, please subscribe my youtube channel.
Click this↓ And Click "subscribe".

-If you print on browser, it may not be full scale. You should save the file on your PC, then print the file.
-In case of PDF format, use Adobe Reader(free ware).
-In case of JPG format, When you print it by magnification 100%, it will be full scale.
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue.
-Size:Free size
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

How to make
Make Templates from Drawing paper.
When you want to know detailed tutorial of making Templates, browse this page.
When you make Templates of the head, use a mannequin head.





Repeat cutting and pasting.
Cut open.


Copy to new Drawing paper and make a fair copy.


Assemble the fair copy.


When you make a ideal from, cut open it. Use it.


Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


**********************************************************************

EVA foam is a soft material.
You can process it easily.
Another name is EVA board, EVA zote, Craft foam etc.
I usually use one called "Lion board".
"Lion board" is sold only in Japan.

Watch video.

**********************************************************************


【5mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私もこの商品を使っています。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【5mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買う】


【5mm厚COSボードを楽天で買う】


【5mm厚COSボードをネット通販で買う】


**********************************************************************

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

When you cut, put EVA foam on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Art knife PRO for small ornaments etc.

**********************************************************************


Make holes on the patterns of the Templates. Mark them with a pen.


Marking was completed.


Glue with a Liquid instant glue.
When you use a Instant glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)


**********************************************************************


Instant glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch movie.

Instant glue Accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About instant glue
I use general liquid Instant glue.


Case of sticking except instant glue.
"Bond G17"(one of liqud glue in Japan) can glue too. It's can glue narrow surfaces too.
But it's take time.
Moreover, when you use Thinned "Bond G17"(one of liqud glue in Japan) as a undercoat,
glued surfaces may melt.
(If you use Gesso, there is no problem.)

**********************************************************************


Glue with a Liquid instant glue.


Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


Glue with a Liquid instant glue.


Bend by heating with a Lighter or a Heat gun.

←ガス充填式ライターとガスボンベを使うとお得


Cut it into slant with a Box cutter.


Glue with a Liquid instant glue.


Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


Cut it into slant with a Box cutter.


Glue with a Liquid instant glue.


Glue with a Liquid instant glue.


Glueing was completed.


Dig a pattern with a Soldering iron.(Don't breathe in the smoke and don't put in eyes)



Cut 2mm or 1.5mm thick EVA foam thin.


【1.5mm厚ライオンボード(別名:リアラボード、ソフトボード)をAmazonで買う】
リアラボードという商品名ですがこれが俗に言うライオンボードです。
私もこの商品を使っています。


裏面がシールになってて接着剤を使わず貼り付け可能、装飾等にオススメ。


【1.5mm厚ライオンボード(別名:リアラボード、ソフトボード)を楽天で買う】


【1.5mm厚COSボードを楽天で買う】


【1.5mm厚COSボードをネット通販で買う】


Glue with a Liquid instant glue.


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)


Draw patterns with a Hot melt(glue gun).



Draw patterns with a Hot melt(glue gun).


Make rivets with a Hot melt(glue gun).


Reinforce by heaping a Hot melt(glue gun) on the backside of glueing places.
Glue Cloth or Synthetic leather on points with burdens.


Cut Elastic cord.


Glue with a Hot melt(glue gun).


Present state.


Stick Masking tape on the point you don't want to paint.



Paint a undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.

There are two methods.
-------------------------------------------------------------------------------------------
1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan). (Moving parts in particular)
-It can't use for PVC pipe or plastic sheets.

【Recommendation】
-Weapons
-Armors without a moving part.

【Undercoat】
Gesso or Black Gesso
or

【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or
-------------------------------------------------------------------------------------------
2.Thinned "Bond G17"(one of liqud glue in Japan)
This is difficult.

【Merit】
-It's sold in D.I.Y shops.
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-You must thin it.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Recommendation】
-All props
(Props with a moving part in particular)

【Tutorial video】


【Undercoat】
"Bond G17"(one of liqud glue in Japan) thined with lacquer thinner
-for big things -for small things

【Paint】
Lacquer Spray or Bottle lacquer paint

-------------------------------------------------------------------------------------------

I use Gesso in this tutorial.


Paint Gesso twice or three times with a brush.
Dry it about 2 ~ 6 hours.


Paint black color as undercoat color with Lacquer Spray.


Drybrush paint copper Bottle lacquer paint with a paint brush.
(Drybrush painting is easy, you can do it with a paint brush. Details are here.)


When you paint Bottle lacquer paint, use a paintbrush,silicon cup(Use as a paint plate. It can easy to peel paints after dry.),
panint stick, thinner.


Paint gold Bottle lacquer paint by Drybrush painting.
(Drybrush painting is easy, you can do it with a paint brush. Details are here.)


Paint silver Bottle lacquer paint by Drybrush painting.
(Drybrush painting is easy, you can do it with a paint brush. Details are here.)


Cut out Clear color 0.5mm thick plastic sheets.



Glue with a Liquid instant glue.


Heap a Hot melt(glue gun) for reinforcement.


Please
I'm making Yotube videos.
Please watch them and please subscribe my channel.
Click this↓ And Click "subscribe".











Visitor's works
テツヤさん
ギョクヨガさんの型紙を利用して、ペストマスク(OD版)を作りました。
型紙があると、簡単に作れますね。♪( ´▽`)


mizukiさん
ギャクヨガさんのペストマスクを参考にダンボールで作ってみました!作るの楽しい(≧▽≦)




Rabiyaさん
ギャクヨガ様の型紙を借りてペストマスクを作りました!!
素敵な型紙と作り方でいい感じに出来ました ありがとうございます


まりあさん
今回ペストマスクの型紙お借りしました!いつもお世話になってます。ありがとうございましたm(_ _)m


えすたさん
ペトショ頭どう作ったの?と、ご質問頂いたのでお答えしやす。
土台はギャクヨガさんのペストマスク(←かっこいい)を参考にして百均のEvaシートで制作→クチバシ塗る→
羽を1枚ずつ接着。テテーン!!ギャクヨガさん、とても参考になりました!
この場を借りてお礼申し上げます。


さん
ギャクヨガ様からお借りした型紙でペストマスクを作り、少し早いハロウィンしてきました(*^^*)有り難うございました


ぴえーるさん
型紙をお借りしてペストマスクを造りました!いつもお世話になっております。
ハロウィンに使わせてもらおうと思います!ありがとうございました!m(_ _)m


シンディさん
そういえばできました。
ものすごく厨二心がたぎる。


Return to Top page