Nov.7
My Youtube channel moved this URL.
New Youtube Channel
Please subscribe again.
I'll upload videos this channell after this.
My profile

Touken ranbu
How to make Nakigitsune's mask (with templates)



Materials
[Materials for making templates]
-Drawing paper 5sheets
-Scotch tape(Sellotape) 1piece
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→3mm thick 100cm X 30cm
-Liquid super glue 1piece
-Hot melt(glue gun) 10pieces (When you use a Air duster for cooling, it's convenient)
-Elastic cord 1piece

[Painting materials]
1.When a undercoat is Gesso
-Gesso 50ml
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*

2.When a undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of liqud glue in Japan) 100ml
-lacquer thinner 100ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*

*The paiting area is written in the package, refer it. Details are here.

Materials cost
1000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Paint tools, such as a paintbrush
-Punch and hammer

Convenient tools when you have
-Art knife PRO
-Heat gun
-Super glue Accelerator

Work time
7hours

Spec
Weight 18g

Template data
PDF format(A4 size)

-How to print is here.
-After printing, it becomes easy to use by sticking it on Drawing paper with spray glue.
-Size:Free size
-Mentions of "x1","x2" etc are the numbers of sheets.
(If you need both arms or both legs etc, cut the number of double.)
-Mentions of "2mm" , "5mm" etc are thickness of EVA foam.

Completion drawing


Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.


-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

Tutorial video
When you watch this video before reading this page, you can understand this page better.


How to make
Make Templates from Drawing paper.
When you want to know detailed tutorial of making Templates, browse this page.
When you make Templates of the head, use a mannequin head.





Repeat cutting and pasting.


Repeat cutting and pasting.


Cut open.


Copy to new Drawing paper and make a fair copy.


Assemble the fair copy.


Repeat cutting and pasting.


When you make a ideal from, cut open it. Use it.


Copy the edges of Templates on a material with a pen.
Cut out 2mm or 1.5mm thick EVA foam.


**********************************************************************

EVA foam is a soft material.
You can process it easily.
Another name is EVA board, EVA zote, Craft foam etc.
I usually use one called "Lion board".
"Lion board" is sold only in Japan.

Watch video.

**********************************************************************


-------------------------------------------------------------------------------------------------------
【3mm厚COSボード】


【3mm厚ライオンボード(別名:リアラボード)】


楽天なら


【コスプレボード】
楽天なら


Amazonならこちら
-------------------------------------------------------------------------------------------------------

**********************************************************************

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

When you cut, put EVA foam on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Art knife PRO for small ornaments etc.

**********************************************************************


Make holes on the patterns of the Templates. Mark them with a pen.


Marking was completed.


Glue with a Liquid super glue.
When you use a Super glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)


**********************************************************************


Super glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch video.


Super glue accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About super glue
I use general liquid super glue.

**********************************************************************


Glue with a Liquid super glue.


Glueing was completed.


Cut 2mm or 1.5mm thick EVA foam thin.


Glue with a Liquid super glue.


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)

←ガス充填式ライターとガスボンベを使うとお得


Reinforce by heaping a Hot melt(glue gun) on the backside of glueing places.



Glue a broken piece of EVA foam with a Hot melt(glue gun). Hold it while painting.
(Cut it off after painting.)


Begin painting.
At first, paint a undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.

There are two methods.
-------------------------------------------------------------------------------------------
1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.
-There are several colors one, white black etc.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan).
 Then, use this for weapons and armors without moving parts.
-The gross is smaller than Thinned "Bond G17"(one of liqud glue in Japan).

【Commodities page】
Gesso or Black Gesso
or

【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or
-------------------------------------------------------------------------------------------
2."Bond G17"(one of liqud glue in Japan)
This is difficult, however it's almighty.

【Merit】
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-"Bond G17" is japanese commodity.
 Then you can't get it easily.
 Please use others. For example, you can substitute wood glue for it.
-You must thin it with lacquer thinner.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Tutorial video】


【Commodities page】
"Bond G17"(one of liqud glue in Japan) thined with lacquer thinner
-for big things -for small things
-------------------------------------------------------------------------------------------
-About paint
I use following paint.


You can use acrylic paint, when you use Gesso.

-------------------------------------------------------------------------------------------

I use "Zoukei be-su" as undercoat this time.
However it's sold only in Japan.
Use Gesso or Thinned "Bond G17"(one of liqud glue in Japan) in substitution for "Zoukei be-su".


Paint "Zoukei be-su" twice with a brush.


Paint black with Lacquer Spray.


Paint gold of Bottle lacquer paint with a paint brush.


When you paint Bottle lacquer paint, use a paintbrush,silicon cup(Use as a paint plate. It can easy to peel paints after dry.),
panint stick, thinner.


Cut Elastic cord.


Make hole with a Punch.

←手で押しこむだけでお手軽なタイプ←ハンマーで叩くタイプ

Tie.


Reinforce the tie.
Heap with a Hot melt(glue gun).


Please
I'm making Yotube videos.
Please watch them and please subscribe my YouTube channel.
These are new videos.










Visitor's works
いちごとうふさん
とうらぶ鳴狐マスク完成!一昨日、2つ必要と言われてめっちゃ焦った(;´Д`) ギリギリ間に合った。
ギャクヨガさんの型紙を使わせていただきました。
ありがとうございます、ホントに助かりましたー!


まとさん
今回の鳴狐コスで使用した面はギャクヨガ様のサイトを参考にさせていただいてます
作り方も丁寧に説明されていて立体物苦手な私でも奮闘しつつも完成させることが出来ました
いつも大変お世話になっております(*´ω`*)




小次郎さん
昨日のハコスタ楽しかったー!鳴狐のマスク2代目間に合ったのでよかった!
造形はギャクヨガさんのサイトの型紙と作り方を参考にさせて頂きました!
ありがとうございました


こはくさん
マスクにはギャクヨガさんの鳴狐のマスクを改造して使わせて頂きましたー。


さん
鳴狐のマスクはギャクヨガさんのサイトの型紙を使わせて戴きました!すごく助かりました〜!


たつはさん
冬コミ三日目で初出し鳴狐。ちょい加工したのであげー Photo:香月陽
ギャクヨガさん(@gyakuyoga)の鳴狐のお面の作り方を参考に作らせて頂きました!


かるらさん
試作品だけど家にあるもの(紙、ガラス絵の具)でできた\(´ω` )/
雑だし失敗しまくったがマスクっぽい形に!
ライオンボード買ったら頑張ります
型紙お借りしました!


蜜子さん
仮面は、こすフェスでも出演されてたギャクヨガさんの作り方を参考にしたよ*\(^o^)/*
めっっちゃ助かった。ありがとうございました。


ゅゐさん
鳴狐のマスクはギャクヨガさんのサイトを参考に作らせていただきました。
間に合ってよかったナリ\( *´ω`* )/


浅葱さん
マスクも参考にさせていただき、装着済の画像がこちらです。


Twitter霧杜さん
ギャクヨガさんの作り方を参考に鳴狐マスク無事完成しました…!
ま、間に合った…。


カズイさん
鳴狐のマスクの土台の型紙製作過程などもちょっと参考にさせていただきました!
ありがとうございます(*´ω`*)


Return to Top page