My profile & Contact

Tengen Toppa Guren Ragan
How to make Goggle

[Materials for making templates]
-"Kousakuyousi"(one of hard paper in Japan) 1piece
-Scotch tape(Sellotape) 3piece
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→1.5mm or 2mm thick 100cm X 10cm
-Synthetic leather 100cm X 10cm
-"Bond G17"(one of liqud glue in Japan) 50ml
-Liquid super glue 1piece
-Elastic cord 1piece
-Cleare color thick vinyl 100cm X 10cm

[Painting materials]

Materials cost
2000Yen (about 100Yen = 1dollar)

-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)

Convenient tools when you have
-Art knife PRO
-Super glue Accelerator

Work time


Template data
I threw away the Templates, so I can't upload.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

How to build
Cut out 1.5mm or 2mm thick EVA foam.


EVA foam is a soft material.
You can process it easily.
Another name is EVA board, EVA zote, Craft foam etc.
I usually use one called "Lion board".
"Lion board" is sold only in Japan.

Watch video.








Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

When you cut, put EVA foam on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.

Use Art knife PRO for small ornaments etc.


Glue Synthetic leather with "Bond G17"(one of liqud glue in Japan). Details are here.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.


PUストレッチレザー 生地 無地 全52色 黄 オレンジ 赤 ピンク 青系 17色布幅130cm 50cm以上10cm単位販売
価格:176円(税込、送料別) (2019/1/23時点)


ソフトエナメル 生地 無地 42色 モノトーン、ゴールド・シルバー系 全42色 布幅130cm 50cm以上10cm単位販売
価格:188円(税込、送料別) (2019/1/23時点)

I finished glueing.

Cut Cleare color thick vinyl to a size smller than hole of eye.

Glue with a Hot melt(glue gun).

Staple gom cord. Serve with Hot melt(glue gun) for reinforce.

I'm making Yotube videos.
Please watch them and please subscribe my YouTube channel.
These are new videos.

Return to Top page