MAIL
I have facebook.
I'm writting about new props in English.

Fate/Zero
Gilgamesh
How to make Necklace and bracelet



Materials
[Materials for making pattern paper]
-"Kousakuyousi"(one of hard paper in Japan) 1piece
-Elastic cord 1piece

[Main materials]
-Plastic sheets 0.5mm thick 1piece
-"Black instant glue(one of instant glue in Japan) 1piece
-Polyester putty 50g
-Necessary tool to copy by silicon both sides pettern

[Painting materials]
-Lacquer Spray proper quantity*

*Paiting are is written in the package, refer it. Detail is here.

Materials cost
5000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Sizzer
-Box cutter(It's good to change "Pro blade". Moreover,It will become convenient if there is also "Blade breaker")
-Cutting mat
-Paint tools, such as a paintbrush
-Pinvice
-Drill
-Things required for processing plastic sheets(sandpaper etc)

Convenience tools when you have
-Art knife PRO
-Instant glue Accelerator
This spary can harden Instant glue instantly.
It's so useful for glueing small part. Detail is here.
100ml 180ml 420ml

Work time
35Hours

Spec
NecklaceWeight 240g
BraceletWeight 70g

Pattern paper data
I threw away the Pattern paper, so It's can't upload.

Attention at the time of work
Let's consider the following things for accident prevention and health.

-When it uses a thing including the thinner(Bond, lacquer thinner etc) and the spray, make good ventilation.
And wear a gas mask and .
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes, wear a gas mask.

-Do not use the lighter and tools with heart near the things which are easy to burn such as paint or thinner Bond.

-Turn off an outlet and the switch of the tool as soon as you have finished using it.

-Read labels of materials and tools carefully, and understand how to use.

How to make
Make Pattern paper by "Kousakuyousi"(one of hard paper in Japan).



Pattern paper was completed.


Copy the edges of Pattern paper on a material with a pen.
Cut out 0.5mm thick Plastic sheets.



Stick to Cutting mat with double sided tape.
(Because keep horizontal.)


Paste together with Liquid instant glue.
Use Instant glue Accelerator to make good progress.
(In use, steam may be generated. But don't don't breath. And don't meet the steam in eyes.)


*******************************************************************************************

Instant glue can plane surface easy.
But it can't narrow surface well.
Then you should use bellow spray.
I always use this.
Watch movie.

For example, use bellow surface.


Instant glue Accelerator
This can stick surface in several seconds.
100ml can stick one armorset or about three weapons..
100ml 180ml 420ml

About instant glue
General liquid Instant glue is OK.


Case of sticking except instant glue.
"Bond G17"(one of liqud glue in Japan) can stick too. It's can stick narrow surface too.
But it's take time more than Liquid instant glue and Instant glue Accelerator.
And "Bond G17"(one of liqud glue in Japan) may melt stuck surface if you use "Bond G17" painting.
(You should reinfore stuck surface with Liquid instant glue. Or use Gesso painting.)
After all Liquid instant glue and Instant glue Accelerator is the best.

*******************************************************************************************


Serve Polyester putty.

120g 1kg

Serving was completed.


Wait untile hardening.


Serve Polyester putty to opposite side.


Serving was completed.B


Moreover serve Polyester putty on the whole.


Shave form with Box cutter.


Polish Sand paper(around 400grit).
Polish untile seeing Plastic sheets slightly.


Served Polyester putty to hollows and flaws.


Served "Black instant glue(one of instant glue in Japan) to hollows and flaws.


Spray Surface Primer.
Crack and hollow stand out after drying.



Serve "Black instant glue(one of instant glue in Japan) to hollows and flaws.



Polish Sand paper(around 400grit).


Spray Surface Primer.
Repeat above process when surface become beautiful.


Duplicate by double side silicon mold.
Details of duplicating parts with a double side silicon mold are here.







Set frames.
Pour silicon.
Details of duplicating parts with a double side silicon mold are here.





Take off frames when silicon hardens.
Details of duplicating parts with a double side silicon mold are here.


Take off cray.
Details of duplicating parts with a double side silicon mold are here.


Set frames.
Details of duplicating parts with a double side silicon mold are here.


Pour silicon.
Details of duplicating parts with a double side silicon mold are here.


Silicon mold was completed.
Details of duplicating parts with a double side silicon mold are here.


Duplicate by casting resin.
Details of duplicating parts with a double side silicon mold are here.


Duplicate by casting resin.
Details of duplicating parts with a double side silicon mold are here.



Duplicate 5 pieces.
Details of duplicating parts with a double side silicon mold are here.


Polish Sand paper(around 400grit).


Duplicating one by one takes time, then make silicon form can make many pieces at a time.
Details of duplicating parts with a double side silicon mold are here.


Details of duplicating parts with a double side silicon mold are here.


Details of duplicating parts with a double side silicon mold are here.


Silicon mold was completed.
Duplicate by casting resin.
Details of duplicating parts with a double side silicon mold are here.


Edge broken in a big, it's seems flow of air is bad.


Expand a pouring way in order to make flowing air well.


Duplicating was completed.


Serve "Black instant glue(one of instant glue in Japan) to hollows and flaws.



Served Polyester putty to hollows and flaws.


Polish Sand paper(around 400grit).


Make hole letted codes pass.
Make hole with Pinvice lightly.



Make hole with Drill along the hole.


In case of bracelet make two holes.


Paint.
Splay Surface Primer for casting resin.



Paint gold color with Lacquer Spray.


Let codes pass.


In case of bracelet, let gom codes pass.


Paint Liquid instant glue for prevention frays.


Youtube video and completed photos
I uploaded video version of this tutorial.
Please watch this too.















Return to Top page