Nov.7
My Youtube channel moved this URL.
New Youtube Channel
Please subscribe again.
I'll upload videos this channell after this.
My profile

How to make fate like chalice


Materials
[Materials for making templates]
-"Kousakuyousi"(one of hard paper in Japan) 5sheets
-Scotch tape(Sellotape) 3pieces
-Packaging tape(parcel tape) 1piece

[Main materials]
-EVA foam
→2mm or 1.5mm thick 100cm X 40cm
→5mm thick 100cm X 70cm
→10mm thick 100cm X 60cm
-"Bond G17"(one of liqud glue in Japan) 100ml
-Liquid instant glue 5pieces
-Hot melt(glue gun) 10pieces (When you use a Air duster for cooling, it's convenient)
-Wire 100cm
-PVC pipe(diameter 22.0mm) 1piece

[Painting materials]
1.When a undercoat is Gesso
-Gesso 100ml
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) or acrylic paint proper quantity*
-Masking tape 1piece

2.When a undercoat is Thinned "Bond G17"(one of liqud glue in Japan)
-"Bond G17"(one of liqud glue in Japan) 200ml
-lacquer thinner 200ml
-Paintbrush 1piece
-Paper cup, bowl etc 1piece
-lacquer paint(Bottle lacquer paint, Lacquer Spray etc) proper quantity*
-Masking tape 1piece

*The paiting area is written in the package, refer it. Details are here.

Materials cost
5000Yen (about 100Yen = 1dollar)

Tools
-Writing implement(Pencil,eraser,ballpoint,Magic Marker,ruler)
-Scissors
-Box cutter(Use also a "Pro blade" and a "Blade breaker")
-Cutting mat
-Hot melt(glue gun)
-Lighter
-Soldering iron and soldering iron stand
-Saw or Pipe cutter
-Paint tools, such as a paintbrush

Convenient tools when you have
-Art knife PRO
-Circle cutter
-Instant glue Accelerator
This spary can harden Instant glue instantly. Details are here.
←100ml ←180ml ←420ml

Work time
18hours

Spec
Height 50cm
Cup diameter 60cm

Template
I threw away the Templates, so I can't upload.

Attention in the work
-When you uses a thing including the thinner(Bond, lacquer thinner etc) or spray, make good ventilation.
And wear a gas mask.
<-I'm using this mask.

-When you toast mterials etc, make good ventilation.
And don't breathe smoke, don't put smoke in your eyes.

-When you dig mterials etc with Soldering iron, make good ventilation.
And don't breathe in smoke, don't put smoke in your eyes.

-Don't use fire near the things which are easy to burn such as paint, thinner etc.

-When you finished using tools, pull an outlet.

-Read labels of materials and tools, and understand how to use.

How to make
Make Templates from "Kousakuyousi"(one of hard paper in Japan).
When you want to know detailed tutorial of making Templates, browse this page.

I use this site's hemisphere type pattern paper for the cup.
Thank you very much.
The page of hemispere type pattern paper.



Templates was completed.


Make a cup.
Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


**********************************************************************

EVA foam is a soft material.
You can process it easily.
Another name is EVA board, EVA zote, Craft foam etc.
I usually use one called "Lion board".
"Lion board" is sold only in Japan.

Watch video.

**********************************************************************



【5mm厚ライオンボード(別名:リアラボード)】
リアラボードという商品名ですがこれが俗に言うライオンボードです。


楽天なら


【5mm厚COSボード】

**********************************************************************

Use a sharp blade. For example, "Pro Blade".
This is so sharp.
←10枚入り ←50枚入りお得パック

When you cut, put EVA foam on Cutting mat.
Don't cut in the air, while holding by hand.
Break a b blade frequentry, if you feel sharpness of using blade became bad.
If you want to do work more speedy, use "Running fire box cutter","Blade breaker".
"Running fire box cutter" can have 6 pieces blade inside.
"Blade breaker" can break easy and speedy.


Use Art knife PRO for small ornaments etc.

**********************************************************************


Make a hole with a Box cutter.


Glue with a Liquid instant glue.
When you use a Instant glue Accelerator, Hardening speed becomes fast.
(Smoke may be generated. Don't breathe in the smoke and don't put in eyes.)


**********************************************************************


Instant glue can glue a large surfaces easily.
But it can't glue a small surface such as this photo well


Then you should use a following spray.
I always use this.
Watch movie.

Instant glue Accelerator
This can glue surfaces in several seconds.
When you use 100ml, you can make a armorset or about three weapons.
←100ml ←180ml ←420ml

About instant glue
I use general liquid Instant glue.


Case of sticking except instant glue.
"Bond G17"(one of liqud glue in Japan) can glue too. It's can glue narrow surfaces too.
But it's take time.
Moreover, when you use Thinned "Bond G17"(one of liqud glue in Japan) as a undercoat,
glued surfaces may melt.
(If you use Gesso, there is no problem.)

**********************************************************************


Glueing was completed.


Copy the edges of Templates on a material with a pen.
Cut out 2mm or 1.5mm thick EVA foam.

【1.5mm厚ライオンボード(別名:リアラボード)】
リアラボードという商品名ですがこれが俗に言うライオンボードです。


楽天なら


【1.5mm厚COSボード】


Glue with a Liquid instant glue.


Dig a pattern with a Soldering iron.(Don't breathe in the smoke and don't put in eyes)



Draw patterns with a Hot melt(glue gun).



Cut 2mm or 1.5mm thick EVA foam thin.


Glue with a Liquid instant glue.


Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


Glue with a Liquid instant glue.


Cut the corner into slant with a Box cutter.


Cut out 10mm thick EVA foam.
You must use a tool for cutting out a fair circle. Details are here.


Cut with a Box cutter.


Glue with a Liquid instant glue.


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)


Make a stem.
Copy the edges of Templates on a material with a pen.
Cut out 5mm thick EVA foam.


Glue with a Liquid instant glue.


Cut it into slant with a Box cutter.


Cut out 10mm thick EVA foam.
You must use a tool for cutting out a fair circle. Details are here.


Glue with a Hot melt(glue gun).


Cut out 10mm thick EVA foam.
You must use a tool for cutting out a fair circle. Details are here.



Glue with a Liquid instant glue.


Glueing was completed.


Cut out 10mm thick EVA foam.
You must use a tool for cutting out a fair circle. Details are here.


Glue with a Liquid instant glue.


Form by shaving with a Box cutter.


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)


Glue with a Liquid instant glue.
Heap a Hot melt(glue gun) for reinforcement.


Cut 2mm or 1.5mm thick EVA foam thin.


Glue with a Liquid instant glue.


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)


Draw patterns with a Hot melt(glue gun).


Cut out 10mm thick EVA foam.
You must use a tool for cutting out a fair circle. Details are here.


Glue with a Liquid instant glue.


Cut with a Box cutter.


Glue with a Liquid instant glue.


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)


Mark pattern by penn.
Dig marked pattern with a Soldering iron.(Don't breathe in the smoke and don't put in eyes)


Digging was completed.


Cut out 10mm thick EVA foam.
You must use a tool for cutting out a fair circle. Details are here.


Glue with a Liquid instant glue.


Cut with a Box cutter.


Cutting was completed.


Glue with a Liquid instant glue.


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)


Dig a pattern with a Soldering iron.(Don't breathe in the smoke and don't put in eyes)


Glue with a Liquid instant glue.


Upper view.


Bend wires.


Glue with a Hot melt(glue gun).


Cut 2mm or 1.5mm thick EVA foam thin.


Glue with a Liquid instant glue.


Make a core.
Cut a PVC pipe.
PVC pipe can be cut with a saw.
But a Pipe cutter is more better.
It can cut quickly and neatly.



This is a video of cutting method of PVC pipe, bending method, jointing method.


Cutting was completed.


Cut out 10mm thick EVA foam.
You must use a tool for cutting out a fair circle. Details are here.


Glue with a Liquid instant glue.


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)


Make a base.
Cut out 10mm thick EVA foam.


Paste with "Bond G17"(one of liqud glue in Japan).
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(You may glue with a Liquid instant glue. However "Bond G17"(one of liqud glue in Japan) is useful for the large area.)
Paste together only the edge with Liquid instant glue.



Glueing was completed.


Form by shaving with a Box cutter.


Remove the corner by toasting with a Lighter.(Don't breathe in the smoke and don't put in eyes)


Paint a undercoat on EVA foam.
The effects are as follows.

-Color becomes well.
-It becomes hard to come off.
-Gloss comes out well.
-You can save quantity of the paint.

There are two methods.
-------------------------------------------------------------------------------------------
1.Gesso
This is easy.

【Merit】
-It's usable just to paint with a paint brush.
-Gesso don't contain thinner, then you can use it in the room.
-You can use also Acrylic paint.

【Demerit】
-It's easy to come off than Thinned "Bond G17"(one of liqud glue in Japan). (Moving parts in particular)
-It can't use for PVC pipe or plastic sheets.

【Recommendation】
-Weapons
-Armors without a moving part.

【Undercoat】
Gesso or Black Gesso
or

【Paint】
Lacquer Spray or Bottle lacquer paint or acrylic paint
or
-------------------------------------------------------------------------------------------
2.Thinned "Bond G17"(one of liqud glue in Japan)
This is difficult.

【Merit】
-It's sold in D.I.Y shops.
-It'st hard to peel off.
-It can use for PVC pipe or plastic sheets.

【Demerit】
-You must thin it.
-It needs thinner, then you must work outdoors.
-It burns easily.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
The parts will be charred in seconds.

【Recommendation】
-All props
(Props with a moving part in particular)

【Tutorial video】


【Undercoat】
"Bond G17"(one of liqud glue in Japan) thined with lacquer thinner
-for big things -for small things

【Paint】
Lacquer Spray or Bottle lacquer paint

-------------------------------------------------------------------------------------------

I use Thinned "Bond G17"(one of liqud glue in Japan) in this tutorial.
But I recommend Gesso for begginers.


Paint "Bond G17"(one of liqud glue in Japan) thined with lacquer thinner three or four times.
Don't use fire until drying, because "Bond G17" burns easily. Don' use a Lighter etc until drying.
(It will char in seconds.)
Dry it about 2 ~ 6 hours.


Dry it about 2 ~ 6 hours.


Paint gray color as undercoat color with Lacquer Spray.


Paint gray color as undercoat color with Lacquer Spray.


Paint white color with Lacquer Spray.


Paint white pearl color with Lacquer Spray.



Stick Masking tape on the point you don't want to paint.



Paint black with Lacquer Spray.


Paint gold Bottle lacquer paint by Drybrush painting.


Drybrush painting is easy, you can do it with a paint brush.
Read here or watch this video.


When you paint Bottle lacquer paint, use a paintbrush,silicon cup(Use as a paint plate. It can easy to peel paints after dry.),
panint stick, thinner.


Painting was completed.


Paint black color as undercoat color with Lacquer Spray.


Paint gold Bottle lacquer paint by Drybrush painting.


Please
I'm making Yotube videos.
Please watch them and please subscribe my channel.
These are new videos.




















Dismantle state.


How to assemble.






Complete.


Return to Top page